New V1.5 of GooeyCore for all platforms and updated MacOS instructions to get it all running with MacOS Gatekeeper security.
Can preprocess/assemble/run from RAM right from GooeyCore, no need to open an editor to test patches.
Search found 158 matches
- Fri May 12, 2023 2:45 pm
- Forum: Software
- Topic: Updated GooeyCore and setup instructions
- Replies: 2
- Views: 22876
- Thu May 04, 2023 8:32 am
- Forum: Hardware
- Topic: stacking two FXCore chips
- Replies: 4
- Views: 16488
Re: stacking two FXCore chips
Sure, as long as there are enough I2S I/O pins and there is one master so the rest are synced to the same clocks you can do a bunch of different configs depending on product requirements. A few possible examples: CODEC I2S out - > in 0/1 FXCore 1 / FXCore 1 out 2/3 -> in 0/1 FXCore 2/FXCore 2 out 0/...
- Wed May 03, 2023 9:47 am
- Forum: Hardware
- Topic: Volume drop
- Replies: 2
- Views: 16092
Re: Volume drop
I just checked my board on the bench and it is fine, output is same amplitude as input in bypass. I used a signal generator and a scope to look at the signals so not relying on ears. Could be your signal source, if it is a guitar then you will need to buffer the signal from the guitar. The dev board...
- Wed Apr 26, 2023 9:52 am
- Forum: Software
- Topic: Reverse Reverb
- Replies: 3
- Views: 16794
Re: Reverse Reverb
There is a reverse reverb for the FV-1 at https://mstratman.github.io/fv1-programs/ should be able to port it to FXCore. No idea what it sounds like but it is a starting point.
- Mon Apr 24, 2023 4:01 pm
- Forum: Software
- Topic: Ring modulator GooeyCore patch
- Replies: 0
- Views: 20000
Ring modulator GooeyCore patch
Requires V1.2 or greater of GooeyCore and latest libraries. Get from the FXCore products page. POT0 controls LFO rate POT1 controls mix from 0% wet/100% dry to 100% wet/0% dry SW0 and SW1 select waveform SW2 selects slow or fast LFO rate, slow sounds more like tremolo except for square wave since i...
- Fri Apr 21, 2023 10:24 am
- Forum: Software
- Topic: Flanger GooeyCore program
- Replies: 0
- Views: 19853
Flanger GooeyCore program
Make sure to first get the updated DSP library from the downloads for FXCore then copy and paste the following into a file can call it push_flanger.gcf or what ever you want to call it. Works by pressing and holding the tap tempo button to "slow" the reel, releasing the button allows it to...
- Fri Apr 21, 2023 10:21 am
- Forum: Software
- Topic: Stereo plate reverb GooeyCore program
- Replies: 0
- Views: 19866
Stereo plate reverb GooeyCore program
Make sure to first get the new reverb library from the downloads for FXCore then copy and paste the following into a file can call it plate_reverb.gcf or what ever you want to call it. <GooeyCoreDesign> <blocks> <fxblock> <id>6</id> <lib>SFR</lib> <sub>IN0</sub> <x>42</x> <y>274</y> <pins> <pin> <na...
- Fri Apr 21, 2023 10:18 am
- Forum: Software
- Topic: Basic reverb GooeyCore program
- Replies: 0
- Views: 19656
Basic reverb GooeyCore program
Make sure to first get the new reverb library from the downloads for FXCore then copy and paste the following into a file can call it reverb.gcf or what ever you want to call it. <GooeyCoreDesign> <blocks> <fxblock> <id>8</id> <lib>SFR</lib> <sub>POT0_SMTH</sub> <x>67</x> <y>125</y> <pins> <pin> <na...
- Wed Apr 19, 2023 4:51 pm
- Forum: Software
- Topic: GooeyCore V1.0
- Replies: 0
- Views: 19912
GooeyCore V1.0
V1.0 released for all supported platforms at http://experimentalnoize.com/product_FXCore.php
Other tools also received some updates and Windows x64 specific versions are also available.
Other tools also received some updates and Windows x64 specific versions are also available.
- Fri Apr 14, 2023 9:35 am
- Forum: Software
- Topic: GooeyCore ALPHA release
- Replies: 3
- Views: 16709
Re: GooeyCore ALPHA release
Just as an update, the Mac versions are still being worked on. We ran into a little issue with them that caused a delay. We believe we have it fixed and have update the Mac code to the same level as the Windows code and are testing it internally. Also updating the menu and keyboard short cuts to be ...