Search found 42 matches
Re: ISP board
The VID/PID of the device is what i thought would be the stumbling block on building one myself so i completely understand that.
Nice to know about the 4558 codec, I have the datasheets for other codecs as well which seem to be ready sooner.
Nice to know about the 4558 codec, I have the datasheets for other codecs as well which seem to be ready sooner.
Re: ISP board
Cheers Frank for the quick reply, I expect Profusion will get back to me after the weekend so I will know their standing on the ISP boards. If I can't get one from them will I be able to get one from you, if not, is it allowed for me me to build my own as it looks identical to the devboard ft260/eep...
ICP board
Hi Frank, I have just populated a new fxcore based pedal as a test rig in addition to my EN dev board but I'm looking for the ISP programmer board. Are these available yet as at the moment I am just wiring the pedal up to the devboard to program the fxc dsp chip. It would be much easier if I can get...
- Fri Jan 22, 2021 9:41 am
- Forum: SKRM Modules
- Topic: SKRM-C8-eTap2: For Piets echotapper
- Replies: 10
- Views: 48489
Re: SKRM-C8-eTap2: For Piets echotapper
Thank you for the programming advice. I had been looking into re-programming with a pickit2 with a hope that's what the headers are =] And with regards to specific module information.. Is the Module stereo or mono output? Is there a full set of 8 programs on the prom? Should I use the Input/Output ...
- Thu Jan 21, 2021 3:08 pm
- Forum: SKRM Modules
- Topic: SKRM-C8-eTap2: For Piets echotapper
- Replies: 10
- Views: 48489
Re: SKRM-C8-eTap2: For Piets echotapper
Hi Tom,
As PhilHaw has said , Piet's Echotapper info is available but you would need to ask for the info you need so that either of us could dig up. Philip, Steve and myself have developed the Echotapper with Piet's permission much further so whatever you need to know we should be able to help you.
As PhilHaw has said , Piet's Echotapper info is available but you would need to ask for the info you need so that either of us could dig up. Philip, Steve and myself have developed the Echotapper with Piet's permission much further so whatever you need to know we should be able to help you.
- Tue Oct 06, 2020 5:44 am
- Forum: Hardware
- Topic: FX-Core clock
- Replies: 1
- Views: 17843
FX-Core clock
When the FX-core is set at 32KHz clock via the PLL pins, is it actually running at 32KHz or 32.768, many of the example programs have entries in the code to set fs =32768 for filter calculations but if the actual speed is 32KHz then the formulas will be out a bit. Could you clarify if the real clock...
- Tue Sep 15, 2020 11:29 am
- Forum: Hardware
- Topic: Switch and PGM pins
- Replies: 2
- Views: 17774
Re: Switch and PGM pins
Thank you for the confirmation.
- Tue Sep 15, 2020 8:19 am
- Forum: Hardware
- Topic: Switch and PGM pins
- Replies: 2
- Views: 17774
Switch and PGM pins
I have a question regarding some of the input pins of the FX-Core. I have been wondering if pins such as the SW and PGM are 5v tolerant or will need to have voltage level shifters when using a 5v micro to control these pins?
Cheers
Cheers
- Thu Aug 20, 2020 2:37 pm
- Forum: Software
- Topic: Updated assembler
- Replies: 6
- Views: 4321
Re: Updated assembler
Thanks Frank , I had not realized the PDF update to go with the software had been uploaded as well. I will have to pay more attention next time