EXPERIMENTAL NOIZE
PRODUCTS - FOR MANUFACTURERS

FV-1
FV-1 Development Board
SKRM-C8 Modules

FV-1
The Spin Semiconductor FV-1 is a complete reverb solution in a single IC. With integrated stereo ADC and DACs, the FV-1 can be treated like any other analog component in your products signal path.
The FV-1 can access a total of 16 programs, 8 are built in to the internal ROM and the designer may elect to connect a serial EEPROM with 8 additional programs. By using an external EEPROM, the designer can distinguish his product from others by creating a custom program set without the need for a microprocessor in the system.
With 3 potentiometer inputs, programs may have real time variable parameters such as decay time in a reverb, rate and depth in a chorus or frequency in a filter. These inputs are available as coefficients to your program and may be used independently of each other.
The rich instruction set allows users to program effects of all kinds. With instructions like LOG and EXP, users can easily program audio expansion and compression routines. Integrated digital LFOs and ramp generators allow for programming chorus, flange and pitch shift.

Download the Data Sheet

FV-1 Dev Board
The SPN1001-DEV development board allows you to develop custom programs for use in the SPN1001 reverb chip. Using the freely available SpinAsm software (see link below) you can create programs and download them into the SPN1001-DEV.
The SPN1001-DEV connects to and draws its power from any available USB port on your computer.

Download the Data Sheet

SKRM-C8 Modules
The SKRM-C8 reverb and effects module line is an easy to integrate effects solution for your pedal, amp or other audio equipment. These modules are available pre-programmed and can be custom programmed for your product. Modules operate from 5V to 12V DC to ease integration into your design.

Download the General SKRM-C8 Data Sheet
For Information on Available Code Sets Click Module Names Below.
SKRM-C8-G01: Mono guitar effects module
Download the SKRM-C8-G01 Data Sheet
Click each program name below to hear a sample, please remember the module supports real time parameter adjustment so this is only one possible setting:

Prgm#
Name
0
Echo+Reverb
1
Echo/Repeat+Reverb
2
Chorus+Reverb
3
Flange+Reverb
4
Phase Shifter+Reverb
5
Tremolo+Reverb
6
Vibrato+Reverb
7
Auto-Wah+Reverb
SKRM-C8-R01: Mono reverb and delay module
Download the SKRM-C8-R01 Data Sheet
Click each program name below to hear a sample, please remember the module supports real time parameter adjustment so this is only one possible setting:

Prgm#
Name
0
Reverb 1
1
Reverb 2
2
Plate 1
3
Plate 2
4
Reverse Reverb
5
Spring Reverb
6
Echo
7
Modulated Delay
SKRM-C8-R02: Mono-in/stereo-out reverb and delay module
Download the SKRM-C8-R02 Data Sheet
Click each program name below to hear a sample, please remember the module supports real time parameter adjustment so this is only one possible setting:

Prgm#
Name
0
Room Reverb
1
Hall Reverb
2
Cathedral Reverb
3
Gated Reverb
4
Plate Reverb
5
Delay+Reverb
6
Delay
7
Ping-Pong Delay
SKRM-C8-eTap2: For Piets echotapper
For more info on the eTap2 see Piet's page at http://www.echotapper.nl/wp/?p=1523

Experimental Noize
sales@xnoize.com
Copyright © 2015, 2016 Experimental Noize All Rights Reserved